Achieve Coal Mine Safety Regulations for Inert Gas Utilizing Nitrogen Generator Systems
The primary application for nitrogen gas use in the mining industry is extinguishing coal mine fires. However, updated regulations require miners to inert abandoned/worked-out areas of the mines if insufficient seals are installed.
The key initiative in extinguishing a coal mine fire is to reduce oxygen content of the combustive gases below the lower limit of explosion (LEL). Specialty foams are occasionally injected with nitrogen gas to help seal off air ingress to the fire and help cool the surface of the coal embers after the LEL has been achieved. Injection continuously is required for days, even months in some cases. Hauling or using liquid nitrogen to mining location is costly and yields safety concerns. A more reliable and cost effective method is to generate nitrogen by utilizing a robust Gaztron Nitrogen Generation System.
The MSHA regulations for underground mine seals were developed to protect miners in active areas of the well from potential explosions in abandoned sections of the mines. Therefore seals must be designed to maintain a minimum of 120 psig within the abandoned or worked-out areas. If the seal requirement cannot be maintained and pressure drops (minimum seal pressure requirement per MSHA is 50 psig) additional nitrogen gas must be injected to satisfy pressure requirements. Per Federal Regulations, this process shall continue in order to maintain an atmosphere of 10% 02 or less.
Features and benefits of using Gaztron Nitrogen:
Engineered Nitrogen gas generation solutions that meet any purity specification
Nitrogen Generator designed to meet the required flow rate
Gaztron generators can be easily transported to site with simple installation
Appropriate for direct injection or as a carrier gas for foam to maintain the inert atmosphere
Project engineering and design support provided by Gaztron
24 hour after installation service and support
Gaztron Engineering Pvt Ltd Nitrogen Gas Generator are Suitable for high Pressure and following models are available
Range of Plant Capacity - 5 to 1000 Nm3/Hr
Nitrogen Purity - Up to 99.998%
Balance Oxygen Content - 5 to 0.5%
Range of Dew Point - -20 to -40 Deg Cent
Discharge Pressure - 5 to 25 kg/cm2
1) Are you Manufacturers or just trading Company? +
We are manufacturers & Exporters of Gas Plants and our State of art manufacturing Facility is located at Greater Noida INDIA.
2) What are your Main Product of manufacturing? +
We manufacturers of Following Types Gas Plants:
1. PSA Nitrogen Gas Plants
2. Ammonia Cracker
3. Gas Storage Tanks
4. PSA Oxygen Gas Plants
5. Air Dryer
6. Cryo Plants
3) Your Company is certified as per International Quality Standard? +
Yes Gaztron India is certified by ISO 9001:2015 Certified company by TÜV Rheinland German.
4) Is your Manufacturing Facility is approved by any statutory Authority? +
Yes Gaztron has obtained all required statutory approvals additional to this Facility is approved by NSIC.
5) Are you providing after sales Services? +
Yes we are providing after Sales services all over the world.
6) How we can get the quotation? +
Send inquiry on info@ gaztron.in we will submit the quotation.
7) How you are doing packing of products? +
We following international standard for packing of Equipments.