NITROGEN GAS GENERATOR FOR 3D PRINTING

In order for additive manufacturing in nitrogen generator 3D printing to take place, an inert atmosphere must be created at the laser. Nitrogen gas is often injected at this juncture to reduce oxygen levels during production. Decreasing the oxygen rate within the process improves safety through the inerting of combustible dust; while also increasing product durability.

The following applications fall in the additive manufacturing industry:

Fast Prototyping: Manufacturing of customized parts with low operating costs.

Aerospace: Engine and turbine parts can be made using additive manufacturing resulting in reduction of costs and lightweight structures.

Medicine: Orthopedic implants, surgical instruments, and dental restorations are often made using 3D additive manufacturing.

GAZTRON Nitrogen Generation technology is a safe, reliable, and cost effective alternative to high pressure N2 cylinders. Our nitrogen generators use Pressure Swing Adsorption (PSA) which separates Nitrogen from oxygen and other residual molecules. Seventy-eight percent of the air we breathe is nitrogen, indicating that you will never run out and are able to produce an unlimited supply of nitrogen on demand.

Gaztron Engineering Pvt Ltd Nitrogen Gas Generator is Suitable for high Pressure and following models are available:

1. Range of Plant Capacity              -              5  to 1000 Nm3/Hr.
2. Nitrogen Purity                             -              Up to 99.9998%
3. Balance Oxygen Content             -              5 to 0.5%
4. Range of Dew Point                     -              -20 to -40 Deg. Cent                        
5. Discharge Pressure                     -              5 to 25 kg/cm2